Dual Bed Dryers
Dual Bed (also called Twin Tower) dryers used to be the most commonly purchased type of resin dryer. In fact, it is estimated that there are between 10 and 20,000 of these dryers still in use today despite their disadvantages.
Dual Bed dryers consist of two beds (or towers) of desiccant beads, process and regenerative blowers, process and regeneration heaters and valves to re-direct the airflow. While one bed of desiccant supplies dry process air to flow through the drying hopper, the other bed – with saturated desiccant – is regenerated, by forcing hot air through it. When the regeneration is complete, that bed becomes the one supplying the dry process air and the first bed goes into the regeneration mode.
Dual Bed dryers are commonly used because they attained a -40˚ dew point and generally do a good job of drying most resins.
They do have their disadvantages:
- High energy usage
- Large footprint
- Relatively high maintenance
- Spikes and deviations in temperature and dew point during bed changeover
In recent years, there have been great advances made in drying technology and several types of dryers now overcome the disadvantages of Dual Bed dryers. These new dryer types include Desiccant Wheel, Membrane, Vacuum and Infrared versions.
Types of Resin Drying Systems
Silo Dehumidification/ Hot Air Dryers
What is a silo dehumidifier and how does it work and compare with other resin drying systems?
The principle of compressing air in factories for power tools and other high-pressure uses has a side benefit for the world of resin drying.
What is a membrane resin dryer and how does it compare to a compressed air dryer without a membrane?
What is a vacuum resin dryer and how does it draw moisture away from plastic pellets in vacuum processing?
Dual Bed (also called Twin Tower) dryers used to be the most commonly purchased type of resin dryer. A look at why, and where the technology has progressed.
The advantages of desiccant wheel dryers include operating at a low temperature, which is important for preventing thermal degradation of the resin.
Technically, crystallizers are not dryers. They are used to convert PET from an amorphous, back to a crystalline state for re-processing.
Drying Hoppers for Plastic Resins
Drying hoppers are part of most drying systems. At a glance, they look much the same, but there are certain features you should look for.
What are the benefits of gas-fired process heaters for drying plastic resins?
Resin drying machines that can be moved from machine to machine within a plastics processing plant have advantages and disadvantages over a central drying system.
Properly designed Central Drying Assemblies are easily connected together to save installation costs.
PET Energy-Saving Drying Systems
Learn about the keys to drying PET efficiently while saving space and energy.
Ask the Expert
