{"id":1029,"date":"2024-08-07T13:50:01","date_gmt":"2024-08-07T13:50:01","guid":{"rendered":"https:\/\/knowledge-center.novatec.com\/?page_id=1029"},"modified":"2026-03-18T13:50:39","modified_gmt":"2026-03-18T13:50:39","slug":"resin-drying-basics","status":"publish","type":"page","link":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/","title":{"rendered":"Drying Basics"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-page\" data-elementor-id=\"1029\" class=\"elementor elementor-1029\" data-elementor-post-type=\"page\">\n\t\t\t\t<div class=\"elementor-element elementor-element-34f2c004 e-con-full e-flex e-con e-parent\" data-id=\"34f2c004\" data-element_type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-8cc5045 e-con-full e-flex e-con e-child\" data-id=\"8cc5045\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-afa988b elementor-widget elementor-widget-shortcode\" data-id=\"afa988b\" data-element_type=\"widget\" data-widget_type=\"shortcode.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-shortcode\">\t\t<div data-elementor-type=\"section\" data-elementor-id=\"666\" class=\"elementor elementor-666\" data-elementor-post-type=\"elementor_library\">\n\t\t\t<div class=\"elementor-element elementor-element-1ffd43f e-con-full e-flex e-con e-parent\" data-id=\"1ffd43f\" data-element_type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-dcfec2f e-con-full e-flex e-con e-child\" data-id=\"dcfec2f\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-38c4973 hfe-submenu-icon-plus elementor-widget__width-auto hfe-nav-menu__align-left hfe-link-redirect-child hfe-nav-menu__breakpoint-tablet elementor-widget elementor-widget-navigation-menu\" data-id=\"38c4973\" data-element_type=\"widget\" data-settings=\"{&quot;padding_vertical_menu_item&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:11,&quot;sizes&quot;:[]},&quot;padding_vertical_dropdown_item&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:6,&quot;sizes&quot;:[]},&quot;menu_space_between&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:0,&quot;sizes&quot;:[]},&quot;padding_horizontal_menu_item&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:15,&quot;sizes&quot;:[]},&quot;padding_horizontal_menu_item_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_horizontal_menu_item_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_vertical_menu_item_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_vertical_menu_item_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;menu_space_between_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;menu_space_between_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;dropdown_border_radius&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;top&quot;:&quot;&quot;,&quot;right&quot;:&quot;&quot;,&quot;bottom&quot;:&quot;&quot;,&quot;left&quot;:&quot;&quot;,&quot;isLinked&quot;:true},&quot;dropdown_border_radius_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;top&quot;:&quot;&quot;,&quot;right&quot;:&quot;&quot;,&quot;bottom&quot;:&quot;&quot;,&quot;left&quot;:&quot;&quot;,&quot;isLinked&quot;:true},&quot;dropdown_border_radius_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;top&quot;:&quot;&quot;,&quot;right&quot;:&quot;&quot;,&quot;bottom&quot;:&quot;&quot;,&quot;left&quot;:&quot;&quot;,&quot;isLinked&quot;:true},&quot;padding_horizontal_dropdown_item&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_horizontal_dropdown_item_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_horizontal_dropdown_item_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_vertical_dropdown_item_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;padding_vertical_dropdown_item_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;distance_from_menu&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;distance_from_menu_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;distance_from_menu_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_size&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_size_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_size_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_border_width&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_border_width_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_border_width_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_border_radius&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_border_radius_tablet&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]},&quot;toggle_border_radius_mobile&quot;:{&quot;unit&quot;:&quot;px&quot;,&quot;size&quot;:&quot;&quot;,&quot;sizes&quot;:[]}}\" data-widget_type=\"navigation-menu.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t<div class=\"hfe-nav-menu hfe-layout-vertical hfe-nav-menu-layout vertical\" data-layout=\"vertical\">\n\t\t\t\t<div role=\"button\" class=\"hfe-nav-menu__toggle elementor-clickable\" tabindex=\"0\" aria-label=\"Menu Toggle\">\n\t\t\t\t\t<span class=\"screen-reader-text\">Menu<\/span>\n\t\t\t\t\t<div class=\"hfe-nav-menu-icon\">\n\t\t\t\t\t\t<svg aria-hidden=\"true\"  class=\"e-font-icon-svg e-fas-align-justify\" viewBox=\"0 0 448 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M432 416H16a16 16 0 0 0-16 16v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16v-32a16 16 0 0 0-16-16zm0-128H16a16 16 0 0 0-16 16v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16v-32a16 16 0 0 0-16-16zm0-128H16a16 16 0 0 0-16 16v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16v-32a16 16 0 0 0-16-16zm0-128H16A16 16 0 0 0 0 48v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16V48a16 16 0 0 0-16-16z\"><\/path><\/svg>\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<nav class=\"hfe-nav-menu__layout-vertical hfe-nav-menu__submenu-plus\" data-toggle-icon=\"&lt;svg aria-hidden=&quot;true&quot; tabindex=&quot;0&quot; class=&quot;e-font-icon-svg e-fas-align-justify&quot; viewBox=&quot;0 0 448 512&quot; xmlns=&quot;http:\/\/www.w3.org\/2000\/svg&quot;&gt;&lt;path d=&quot;M432 416H16a16 16 0 0 0-16 16v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16v-32a16 16 0 0 0-16-16zm0-128H16a16 16 0 0 0-16 16v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16v-32a16 16 0 0 0-16-16zm0-128H16a16 16 0 0 0-16 16v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16v-32a16 16 0 0 0-16-16zm0-128H16A16 16 0 0 0 0 48v32a16 16 0 0 0 16 16h416a16 16 0 0 0 16-16V48a16 16 0 0 0-16-16z&quot;&gt;&lt;\/path&gt;&lt;\/svg&gt;\" data-close-icon=\"&lt;svg aria-hidden=&quot;true&quot; tabindex=&quot;0&quot; class=&quot;e-font-icon-svg e-far-window-close&quot; viewBox=&quot;0 0 512 512&quot; xmlns=&quot;http:\/\/www.w3.org\/2000\/svg&quot;&gt;&lt;path d=&quot;M464 32H48C21.5 32 0 53.5 0 80v352c0 26.5 21.5 48 48 48h416c26.5 0 48-21.5 48-48V80c0-26.5-21.5-48-48-48zm0 394c0 3.3-2.7 6-6 6H54c-3.3 0-6-2.7-6-6V86c0-3.3 2.7-6 6-6h404c3.3 0 6 2.7 6 6v340zM356.5 194.6L295.1 256l61.4 61.4c4.6 4.6 4.6 12.1 0 16.8l-22.3 22.3c-4.6 4.6-12.1 4.6-16.8 0L256 295.1l-61.4 61.4c-4.6 4.6-12.1 4.6-16.8 0l-22.3-22.3c-4.6-4.6-4.6-12.1 0-16.8l61.4-61.4-61.4-61.4c-4.6-4.6-4.6-12.1 0-16.8l22.3-22.3c4.6-4.6 12.1-4.6 16.8 0l61.4 61.4 61.4-61.4c4.6-4.6 12.1-4.6 16.8 0l22.3 22.3c4.7 4.6 4.7 12.1 0 16.8z&quot;&gt;&lt;\/path&gt;&lt;\/svg&gt;\" data-full-width=\"yes\">\n\t\t\t\t\t<ul id=\"menu-1-38c4973\" class=\"hfe-nav-menu\"><li id=\"menu-item-4477\" class=\"menu-item menu-item-type-post_type menu-item-object-page parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/\" class = \"hfe-menu-item\">Plastic Drying Knowledge Center<\/a><\/li>\n<li id=\"menu-item-682\" class=\"menu-item menu-item-type-post_type menu-item-object-page parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/\" class = \"hfe-menu-item\">Resin Moisture &#038; Drying &#8211; Home<\/a><\/li>\n<li id=\"menu-item-1565\" class=\"menu-item menu-item-type-post_type menu-item-object-page parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-moisture\/\" class = \"hfe-menu-item\">Understanding Moisture in Resin<\/a><\/li>\n<li id=\"menu-item-3038\" class=\"menu-item menu-item-type-custom menu-item-object-custom menu-item-has-children parent hfe-has-submenu hfe-creative-menu\"><div class=\"hfe-has-submenu-container\" tabindex=\"0\" role=\"button\" aria-haspopup=\"true\" aria-expanded=\"false\"><a aria-expanded=\"false\" href=\"#\" class = \"hfe-menu-item\">Drying Basics<span class='hfe-menu-toggle sub-arrow hfe-menu-child-0'><i class='fa'><\/i><\/span><\/a><\/div>\n<ul class=\"sub-menu\">\n\t<li id=\"menu-item-1566\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/\" class = \"hfe-sub-menu-item\">Resin Drying Basics<\/a><\/li>\n\t<li id=\"menu-item-3039\" class=\"menu-item menu-item-type-custom menu-item-object-custom hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/wp-content\/uploads\/2023\/04\/Best-Practices-for-Effective-Polymer-Drying.pdf\" class = \"hfe-sub-menu-item\">Best Practices for Effective Polymer Drying<\/a><\/li>\n\t<li id=\"menu-item-3622\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/overdrying-nylon-the-hidden-danger-sabotaging-your-parts\/\" class = \"hfe-sub-menu-item\">Overdrying Nylon: The Hidden Danger Sabotaging Your Parts<\/a><\/li>\n\t<li id=\"menu-item-3566\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/the-hidden-dangers-of-desiccant-dust-in-resin-processing\/\" class = \"hfe-sub-menu-item\">The Hidden Dangers of Desiccant Dust in Resin Processing<\/a><\/li>\n\t<li id=\"menu-item-1567\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/glossary-plastics-performance-issues\/\" class = \"hfe-sub-menu-item\">Glossary: Plastics Performance Issues<\/a><\/li>\n\t<li id=\"menu-item-683\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/modern-vs-old\/\" class = \"hfe-sub-menu-item\">Cost: Old vs. Modern Drying Technology<\/a><\/li>\n<\/ul>\n<\/li>\n<li id=\"menu-item-3046\" class=\"menu-item menu-item-type-custom menu-item-object-custom menu-item-has-children parent hfe-has-submenu hfe-creative-menu\"><div class=\"hfe-has-submenu-container\" tabindex=\"0\" role=\"button\" aria-haspopup=\"true\" aria-expanded=\"false\"><a aria-expanded=\"false\" href=\"#\" class = \"hfe-menu-item\">Resin Types<span class='hfe-menu-toggle sub-arrow hfe-menu-child-0'><i class='fa'><\/i><\/span><\/a><\/div>\n<ul class=\"sub-menu\">\n\t<li id=\"menu-item-1568\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-types\/\" class = \"hfe-sub-menu-item\">Resin Types &#038; Their Impact on Drying<\/a><\/li>\n<\/ul>\n<\/li>\n<li id=\"menu-item-3047\" class=\"menu-item menu-item-type-custom menu-item-object-custom menu-item-has-children parent hfe-has-submenu hfe-creative-menu\"><div class=\"hfe-has-submenu-container\" tabindex=\"0\" role=\"button\" aria-haspopup=\"true\" aria-expanded=\"false\"><a aria-expanded=\"false\" href=\"#\" class = \"hfe-menu-item\">Types of Resin Dryers<span class='hfe-menu-toggle sub-arrow hfe-menu-child-0'><i class='fa'><\/i><\/span><\/a><\/div>\n<ul class=\"sub-menu\">\n\t<li id=\"menu-item-684\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/\" class = \"hfe-sub-menu-item\">A Complete Guide to Resin Drying Technologies<\/a><\/li>\n\t<li id=\"menu-item-3475\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/the-ultimate-guide-to-choosing-the-right-desiccant-resin-dryer\/\" class = \"hfe-sub-menu-item\">The Ultimate Guide to Choosing the Right Desiccant Resin Dryer<\/a><\/li>\n\t<li id=\"menu-item-4656\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/the-ultimate-guide-to-compressed-air-resin-dryers-for-plastics-processors\/\" class = \"hfe-sub-menu-item\">The Ultimate Guide to Compressed Air Resin Dryers for Plastics Processors<\/a><\/li>\n\t<li id=\"menu-item-1569\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/silo-dehumidification-hot-air-dryers\/\" class = \"hfe-sub-menu-item\">Silo Dehumidification\/Hot Air Dryers<\/a><\/li>\n\t<li id=\"menu-item-2755\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/compressed-air-resin-dryers\/\" class = \"hfe-sub-menu-item\">Compressed Air Dryers<\/a><\/li>\n\t<li id=\"menu-item-1573\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/membrane-dryers\/\" class = \"hfe-sub-menu-item\">Membrane Dryers<\/a><\/li>\n\t<li id=\"menu-item-2749\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/resin-vacuum-dryers\/\" class = \"hfe-sub-menu-item\">Vacuum Dryers<\/a><\/li>\n\t<li id=\"menu-item-2754\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/dual-bed-dryers\/\" class = \"hfe-sub-menu-item\">Dual Bed Dryers<\/a><\/li>\n\t<li id=\"menu-item-2752\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/desiccant-wheel-rotor-dryers\/\" class = \"hfe-sub-menu-item\">Desiccant Wheel\/Rotor Dryers<\/a><\/li>\n\t<li id=\"menu-item-2751\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/resin-dryer-technologies-crystallizers-for-reprocessing-pet\/\" class = \"hfe-sub-menu-item\">Crystallizers<\/a><\/li>\n\t<li id=\"menu-item-2753\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/drying-hoppers-for-plastic-resins\/\" class = \"hfe-sub-menu-item\">Drying Hoppers for Plastic Resins<\/a><\/li>\n\t<li id=\"menu-item-1574\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/gas-fired-process-heaters-for-resins\/\" class = \"hfe-sub-menu-item\">Gas-Fired Process Heaters<\/a><\/li>\n\t<li id=\"menu-item-1571\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/portable-resin-drying-systems\/\" class = \"hfe-sub-menu-item\">Portable Resin Drying Systems<\/a><\/li>\n\t<li id=\"menu-item-2750\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/central-resin-dryers\/\" class = \"hfe-sub-menu-item\">Central Resin Dryers<\/a><\/li>\n\t<li id=\"menu-item-1572\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-technologies\/pet-energy-saving-drying-systems\/\" class = \"hfe-sub-menu-item\">PET Energy-Saving Drying Systems<\/a><\/li>\n<\/ul>\n<\/li>\n<li id=\"menu-item-3057\" class=\"menu-item menu-item-type-post_type menu-item-object-page parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/press-side-vs-central-plastic-resin-drying\/\" class = \"hfe-menu-item\">Press-Side vs. Central Plastic Resin Drying<\/a><\/li>\n<li id=\"menu-item-3339\" class=\"menu-item menu-item-type-post_type menu-item-object-page parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/choosing-the-right-resin-moisture-analyzer\/\" class = \"hfe-menu-item\">Choosing the Right Resin Moisture Analyzer<\/a><\/li>\n<li id=\"menu-item-3338\" class=\"menu-item menu-item-type-custom menu-item-object-custom menu-item-has-children parent hfe-has-submenu hfe-creative-menu\"><div class=\"hfe-has-submenu-container\" tabindex=\"0\" role=\"button\" aria-haspopup=\"true\" aria-expanded=\"false\"><a aria-expanded=\"false\" href=\"#\" class = \"hfe-menu-item\">Resin Dryer Maintenance and Trouble Shooting<span class='hfe-menu-toggle sub-arrow hfe-menu-child-0'><i class='fa'><\/i><\/span><\/a><\/div>\n<ul class=\"sub-menu\">\n\t<li id=\"menu-item-1575\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-maintenance\/\" class = \"hfe-sub-menu-item\">Resin Dryer Maintenance<\/a><\/li>\n\t<li id=\"menu-item-3110\" class=\"menu-item menu-item-type-post_type menu-item-object-page hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-dryer-maintenance\/trouble-shooting-guide-for-wheel-dryers\/\" class = \"hfe-sub-menu-item\">Trouble Shooting Guide for Wheel Dryers<\/a><\/li>\n<\/ul>\n<\/li>\n<li id=\"menu-item-3054\" class=\"menu-item menu-item-type-custom menu-item-object-custom parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/novatec-markhaynie-summerweather-whitepaper-final-1.pdf\" class = \"hfe-menu-item\">How to Optimize Resin Drying in Humid Weather<\/a><\/li>\n<li id=\"menu-item-3056\" class=\"menu-item menu-item-type-custom menu-item-object-custom parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/Energy-Saving-Resin-Drying-Installations.pdf\" class = \"hfe-menu-item\">Energy Saving Tips for Resin Dryers<\/a><\/li>\n<li id=\"menu-item-1576\" class=\"menu-item menu-item-type-post_type menu-item-object-page parent hfe-creative-menu\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/faqs\/\" class = \"hfe-menu-item\">Frequently Asked Questions<\/a><\/li>\n<\/ul> \n\t\t\t\t<\/nav>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-34ad906 e-con-full e-flex e-con e-child\" data-id=\"34ad906\" data-element_type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-d17e82e e-grid e-con-full e-con e-child\" data-id=\"d17e82e\" data-element_type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-de4e14b e-con-full e-flex e-con e-child\" data-id=\"de4e14b\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-31490dc elementor-widget elementor-widget-heading\" data-id=\"31490dc\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<p class=\"elementor-heading-title elementor-size-default\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/#drying-parameters\">Drying Parameters<\/a><\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-fa05953 e-con-full e-flex e-con e-child\" data-id=\"fa05953\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4b5795b elementor-widget elementor-widget-heading\" data-id=\"4b5795b\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<p class=\"elementor-heading-title elementor-size-default\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/#energy-efficiency\">Energy Efficiency<\/a><\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-ada44d1 e-con-full e-flex e-con e-child\" data-id=\"ada44d1\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-196839c elementor-widget elementor-widget-heading\" data-id=\"196839c\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<p class=\"elementor-heading-title elementor-size-default\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/#reducing-heat-loss\">Reducing Heat Loss in Desiccant Regeneration<\/a><\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-db77221 e-con-full e-flex e-con e-child\" data-id=\"db77221\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9f9c6b8 elementor-widget elementor-widget-heading\" data-id=\"9f9c6b8\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<p class=\"elementor-heading-title elementor-size-default\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/#consistency\">Consistency of Dried Materials<\/a><\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-1d09ef6f elementor-widget elementor-widget-text-editor\" data-id=\"1d09ef6f\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"-m-b-3 pb-1 pr-2\"><h1 class=\"text-case-reset font-title font-2xl p-t-2 mt-3 page-title\">Resin Drying Basics<\/h1><p class=\"page-deck font-xl\">Proper drying of plastic resin assures the best possible aesthetics and performance characteristics of a plastic product. Use this information as a guide to understanding the basics of drying plastic materials.<\/p><\/div><div class=\"template-a m-t-3 m-b-2\"><div class=\"template-cell p-r-2 m-b-2 template-1_cell-0 cell-0\"><div class=\"kc-hash-link kc-mod wysi-3x3 row p-b-2\"><div class=\"col-xs-12 d-flex align-items-center\"><div class=\"w-full\"><div class=\"article-body text-off-gray\"><p>Drying plastic resin is utilized to minimize or eliminate problems that may be caused by too much or too little moisture in a plastic material during processing. Although most processors accept the need to pre-dry resins, particularly highly hygroscopic ones, many do not understand the basics &#8211; or even the vocabulary of resin drying.<\/p><p>The extent to which moisture affects the quality of a molded or extruded part is determined by the specific plastic resin being processed and the intended purpose of the part. Regardless, it is highly probable that improper or incomplete drying of the raw material will create problems, whether during processing or when the product is in use, or worse &#8211; both.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-bdd81b0 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"bdd81b0\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-baac898 elementor-widget elementor-widget-menu-anchor\" data-id=\"baac898\" data-element_type=\"widget\" data-widget_type=\"menu-anchor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-menu-anchor\" id=\"drying-parameters\"><\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-73f8fbf elementor-widget elementor-widget-text-editor\" data-id=\"73f8fbf\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"col-xs-12\"><h2 class=\"series-title font-title text-color3 p-b-0 font-3xl m-b-0\">4 Fundamental Drying Parameters<\/h2><\/div><div class=\"content-list \"><div class=\"row b-b  p-b-2 m-b-05\"><div class=\"col-xs-12 col-sm-12 col-md-6 col-lg-4\"><div class=\"sixteen-nine \"><a class=\" kcLink\"><picture data-cmp-info=\"10\"><source srcset=\"https:\/\/d2n4wb9orp1vta.cloudfront.net\/cms\/brand\/PT\/build\/resin-moisture-drying\/drying-parameters-heat.jpg;maxWidth=300;quality=70;format=webp\" type=\"image\/webp\" \/><source srcset=\"https:\/\/d2n4wb9orp1vta.cloudfront.net\/cms\/brand\/PT\/build\/resin-moisture-drying\/drying-parameters-heat.jpg;maxWidth=300;quality=70\" \/><\/picture><\/a><\/div><\/div><\/div><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-27d345d e-grid e-con-full e-con e-child\" data-id=\"27d345d\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-42a0344 elementor-widget elementor-widget-image\" data-id=\"42a0344\" data-element_type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img fetchpriority=\"high\" decoding=\"async\" width=\"300\" height=\"169\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp\" class=\"attachment-medium size-medium wp-image-1030\" alt=\"\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2bc0e47 elementor-widget elementor-widget-text-editor\" data-id=\"2bc0e47\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3 class=\"font-title\"><a class=\"alt kcLink\">1. Heat<\/a><\/h3><p class=\"text-summary\">Heat is the driving force in drying. If you don\u2019t heat the pellet it will not release its moisture. Hygroscopic polymers have a strong attraction for water and the water molecules are bound to the polymer chains. Heat causes the molecules to move about more vigorously, weakening the forces that bind the water molecules to the polymer chains. Above certain temperatures, the force that binds the water molecules to the polymer chains are reduced permitting free movement of the molecules to aid the drying process. Non-hygroscopic resins do not adsorb moisture internally into the pellet, however, moisture can collect on the surface of the pellet. Applying heat becomes an important part of removing surface moisture when this happens.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7366409 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"7366409\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d17f908 e-grid e-con-full e-con e-child\" data-id=\"d17f908\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-edc3590 elementor-widget elementor-widget-image\" data-id=\"edc3590\" data-element_type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"300\" height=\"169\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-dewpoint.webp\" class=\"attachment-medium size-medium wp-image-1031\" alt=\"\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-dfacd4f elementor-widget elementor-widget-text-editor\" data-id=\"dfacd4f\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3 class=\"font-title\"><a class=\"alt kcLink\">2. Dew Point<\/a><\/h3><p class=\"text-summary\">Dew Point is the temperature at which moisture in the air begins to condense. The low vapor pressure (dew point) of the dry air surrounding the pellet causes the freed moisture molecules to migrate to the surface of the pellet.<\/p><p class=\"text-summary\"><a href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/understanding-dew-point-in-resin-drying\/\"><b>Learn more about Dew Point\u00a0<\/b><\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-26972cf elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"26972cf\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-4b718c0 e-grid e-con-full e-con e-child\" data-id=\"4b718c0\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-2337d1d elementor-widget elementor-widget-image\" data-id=\"2337d1d\" data-element_type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"300\" height=\"169\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-time.webp\" class=\"attachment-medium size-medium wp-image-1032\" alt=\"\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e165ec4 elementor-widget elementor-widget-text-editor\" data-id=\"e165ec4\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3><a>3. Drying Time<\/a><\/h3>\n<p>Plastic pellets do not dry instantaneously. They must first be heated to allow the water molecules free movement. Then, there must be sufficient time for the water molecules to&nbsp;<span data-teams=\"true\"><span dir=\"ltr\">diffuse&nbsp;<\/span><\/span>to the surface of hygroscopic pellets or for surface moisture to evaporate from the surface of non-hygroscopic materials.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-728b02a elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"728b02a\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-cd2c539 e-grid e-con-full e-con e-child\" data-id=\"cd2c539\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c7ffd2e elementor-widget elementor-widget-image\" data-id=\"c7ffd2e\" data-element_type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img loading=\"lazy\" decoding=\"async\" width=\"300\" height=\"169\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-airflow.webp\" class=\"attachment-large size-large wp-image-1035\" alt=\"\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d038513 elementor-widget elementor-widget-text-editor\" data-id=\"d038513\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3 class=\"font-title\"><a class=\"alt kcLink\">4. Airflow<\/a><\/h3><p class=\"text-summary\">Airflow carries heat or dry heated air to the material in the drying hopper. In the case of non-hygroscopic materials, you must force hot air over and around the pellets to remove surface moisture. With hygroscopic materials, you must force low dew point heated air over the material to make the molecules of moisture disengage from the polymer chains and move to the surface of the pellets where the airflow carries moisture away. The volume of dry air must be sufficient to develop and maintain the desired temperature profile within the drying hopper. If four hours drying time is required, you must maintain the drying temperature for the four-hour level within the drying hopper. If the volume of airflow is reduced, the temperature profile will be reduced.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b384a2e elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"b384a2e\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-8cb5eae elementor-widget elementor-widget-menu-anchor\" data-id=\"8cb5eae\" data-element_type=\"widget\" data-widget_type=\"menu-anchor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-menu-anchor\" id=\"energy-efficiency\"><\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8820380 e-grid e-con-full e-con e-child\" data-id=\"8820380\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ba6c064 elementor-widget elementor-widget-text-editor\" data-id=\"ba6c064\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3>Maximizing Energy Efficiency in Resin Drying Systems<\/h3><p>Some dryer manufacturers tout energy savings while others, who don&#8217;t necessarily have testing facilities nor qualified personnel to conduct testing, try to convince processors that energy savings in\u00a0a dryer is not worth talking about.<\/p><p>A look at\u00a0<a class=\" kcLink\" href=\"https:\/\/knowledge-center.novatec.com\/resin-moisture-drying\/resin-drying-basics\/modern-vs-old\/\">energy costs of old vs. new dryers<\/a>\u00a0will quickly convince you otherwise. The trend of average electricity cost is UP so planning ahead to reduce your energy expenditures is a sensible thing to do. The larger the dryer &#8211; the greater the savings and the better the ROI.<\/p><p>The performance of any drying system is based on using the minimum heat to raise the temperature to the appropriate drying temperature while maintaining a constant material temperature at the throat of the injection molding machine or extruder. Also the regeneration system should minimize the energy used to heat the desiccant material while dedicating most of the energy to removing the moisture gained during the drying process.<\/p><h3>Reducing Process Heat Loss<\/h3><p>You must be cautious about how dryer manufacturers claim energy savings. Temperature Setback or Second Set Point are sometimes sold as energy-saving features but they are not. Most rely on &#8220;Temperature Setback&#8221; &#8211; what does that mean?<\/p><p>Temperature Setback lowers the process temperature in the dryer and thus the resin temperature entering the processing equipment. The result is the processing machine must make up for the lower heat in the resin by increasing the heat from shear and the band heaters. The processing machine ends up using more energy to overcome the shortcomings of the dryer, resulting in no energy savings, and contributing to an inferior end product or product consistency.<\/p><p>Reducing process heat loss to increase energy savings can also be accomplished through the use of VFD&#8217;s (variable frequency drives) to control process blower speed.\u00a0If the airflow rate and temperature rise are minimized, the process heating energy can be as low as necessary to heat the resin. The idea is to minimize the air required so that the minimum energy is used for process heating.\u00a0The temperature of the resin is still raised to the appropriate temperature for the process machine but all of the energy remains in the drying hopper and a minimal amount of heat or energy is returned to the dryer.<\/p><p>To accomplish this effectively the temperature of the resin and the temperature leaving the drying hopper should be continually measured and the air flow rate adjusted so the return air temperature (the temperature returning to the dryer from the drying hopper) is only slightly higher than the temperature of the resin entering the drying hopper.\u00a0This process is controlled by varying the speed of the blower with a Variable Frequency Drive (VFD) which changes the speed of the blower and thus the flow rate of the air. By minimizing the air flow rate, while maintaining the temperature of the resin, the process heat is maintained at the lowest possible level. This allows the required power to adapt to any changes in material rate, resin moisture and temperature of the resin.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-8d012d6 elementor-blockquote--skin-border elementor-widget elementor-widget-blockquote\" data-id=\"8d012d6\" data-element_type=\"widget\" data-widget_type=\"blockquote.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<blockquote class=\"elementor-blockquote\">\n\t\t\t<p class=\"elementor-blockquote__content\">\n\t\t\t\tElectricity costs are trending up,\u00a0so planning ahead to reduce your energy expenditures is a sensible thing to do. The larger the dryer,\u00a0the greater the savings and the better the ROI.\t\t\t<\/p>\n\t\t\t\t\t<\/blockquote>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-0e24dd7 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"0e24dd7\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b070838 elementor-widget elementor-widget-menu-anchor\" data-id=\"b070838\" data-element_type=\"widget\" data-widget_type=\"menu-anchor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-menu-anchor\" id=\"reducing-heat-loss\"><\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-90928b1 e-grid e-con-full e-con e-child\" data-id=\"90928b1\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-da72622 elementor-widget elementor-widget-text-editor\" data-id=\"da72622\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3>Reducing\u00a0Heat Loss in Desiccant Regeneration<\/h3><p>Regeneration can account for as much as 35% of the total power used.\u00a0To maximize energy savings, the power used in the regeneration of the desiccant must be minimal.\u00a0Regeneration consists of heating the desiccant to a temperature at which it releases the moisture gained during the resin drying process. This involves raising the temperature of the desiccant to a point where the moisture retained in the desiccant dissipates.<\/p><p>There are two parts to this system &#8211; each with a specific task. We will demonstrate this using the desiccant wheel dryer as our model:<\/p><p>First, the speed (RPM) of the desiccant wheel is minimized which reduces the pounds per minute of desiccant media to be heated. This is important because heating of the desiccant media detracts from the primary goal of vaporizing moisture and heat is lost without accomplishing the primary goal of water removal.\u00a0 The wheel speed is controlled by a variable frequency drive (VFD) to no more than that required to adsorb the moisture from the return air.\u00a0By controlling the speed of the wheel, the desiccant media is loaded to its maximum while maintaining a consistent dew point of less than &#8211; 40\u00b0F\/C.<\/p><p>The second part is accomplished using a VFD on the regeneration air blower. The VFD minimizes the airflow to a point where water is desorbed from the molecular sieve but only minimal heat leaves the wheel during the regeneration process.\u00a0As the ambient air is heated and passes through the wheel, the discharge temperature is constantly monitored and the VFD adjusts the air flow ensuring that minimal air flow is used to remove all of the moisture gained in drying but no excess air is used.<\/p><p>The temperature of the air exiting the top of the wheel is just enough to remove the moisture and carry it away but is kept at a constant temperature. This ensures that the wheel will remove all of the moisture from the resin regardless of the resin moisture level and will automatically adjust as the moisture changes due to seasonal variations or changes in the virgin\/flake ratios.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-226bb55 elementor-blockquote--skin-border elementor-widget elementor-widget-blockquote\" data-id=\"226bb55\" data-element_type=\"widget\" data-widget_type=\"blockquote.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<blockquote class=\"elementor-blockquote\">\n\t\t\t<p class=\"elementor-blockquote__content\">\n\t\t\t\tRegeneration can account for as much as 35% of the total power used.\t\t\t<\/p>\n\t\t\t\t\t<\/blockquote>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-17a03e7 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"17a03e7\" data-element_type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f933f3e elementor-widget elementor-widget-menu-anchor\" data-id=\"f933f3e\" data-element_type=\"widget\" data-widget_type=\"menu-anchor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-menu-anchor\" id=\"consistency\"><\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5bed24e elementor-widget elementor-widget-text-editor\" data-id=\"5bed24e\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h3>Consistency of Dried Materials<\/h3><p>Proper, uniform drying assists in the molding or extrusion process and aids in the prevention of defects.\u00a0<\/p><h3>Molding times and extrusion rates can be optimized and increased by:<\/h3><ul><li>Uniform Drying to a consistent, low moisture level.<\/li><li>Maintaining a constant drying temperature.<\/li><li>Keeping your drying system in good working condition.<\/li><li>Utilize dryers offering the latest, proven drying technology to avoid temperature or dew point spikes and other inconsistencies.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-24b82d99 e-con-full e-flex e-con e-child\" data-id=\"24b82d99\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8ef452b elementor-widget elementor-widget-shortcode\" data-id=\"8ef452b\" data-element_type=\"widget\" data-widget_type=\"shortcode.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-shortcode\">\t\t<div data-elementor-type=\"section\" data-elementor-id=\"655\" class=\"elementor elementor-655\" data-elementor-post-type=\"elementor_library\">\n\t\t\t<div class=\"elementor-element elementor-element-66df30ab e-flex e-con-boxed e-con e-parent\" data-id=\"66df30ab\" data-element_type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-488ac7ed e-con-full e-flex e-con e-child\" data-id=\"488ac7ed\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5e1da28a elementor-widget elementor-widget-heading\" data-id=\"5e1da28a\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Ask the Expert<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6254b49f elementor-widget elementor-widget-image\" data-id=\"6254b49f\" data-element_type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t<figure class=\"wp-caption\">\n\t\t\t\t\t\t\t\t\t\t<img loading=\"lazy\" decoding=\"async\" width=\"260\" height=\"172\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/Mark-Haynie_Novatec.1678813405148.webp\" class=\"attachment-full size-full wp-image-364\" alt=\"\" \/>\t\t\t\t\t\t\t\t\t\t\t<figcaption class=\"widget-image-caption wp-caption-text\">Mark Haynie Vice President, Moisture &amp; Drying<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-31a085ad elementor-widget elementor-widget-heading\" data-id=\"31a085ad\" data-element_type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Submit A Question<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-1dbd06e3 elementor-button-align-stretch elementor-widget elementor-widget-form\" data-id=\"1dbd06e3\" data-element_type=\"widget\" data-settings=\"{&quot;step_next_label&quot;:&quot;Next&quot;,&quot;step_previous_label&quot;:&quot;Previous&quot;,&quot;button_width&quot;:&quot;100&quot;,&quot;step_type&quot;:&quot;number_text&quot;,&quot;step_icon_shape&quot;:&quot;circle&quot;}\" data-widget_type=\"form.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<form class=\"elementor-form\" method=\"post\" name=\"Ask the Expert Drying\" aria-label=\"Ask the Expert Drying\">\n\t\t\t<input type=\"hidden\" name=\"post_id\" value=\"655\"\/>\n\t\t\t<input type=\"hidden\" name=\"form_id\" value=\"1dbd06e3\"\/>\n\t\t\t<input type=\"hidden\" name=\"referer_title\" value=\"Plastic Knowledge Center\" \/>\n\n\t\t\t\n\t\t\t<div class=\"elementor-form-fields-wrapper elementor-labels-above\">\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-text elementor-field-group elementor-column elementor-field-group-name elementor-col-100 elementor-field-required elementor-mark-required\">\n\t\t\t\t\t\t\t\t\t\t\t\t<label for=\"form-field-name\" class=\"elementor-field-label\">\n\t\t\t\t\t\t\t\tName\t\t\t\t\t\t\t<\/label>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"text\" name=\"form_fields[name]\" id=\"form-field-name\" class=\"elementor-field elementor-size-sm  elementor-field-textual\" placeholder=\"Name\" required=\"required\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-email elementor-field-group elementor-column elementor-field-group-email elementor-col-100 elementor-field-required elementor-mark-required\">\n\t\t\t\t\t\t\t\t\t\t\t\t<label for=\"form-field-email\" class=\"elementor-field-label\">\n\t\t\t\t\t\t\t\tEmail\t\t\t\t\t\t\t<\/label>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"email\" name=\"form_fields[email]\" id=\"form-field-email\" class=\"elementor-field elementor-size-sm  elementor-field-textual\" placeholder=\"Email\" required=\"required\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-textarea elementor-field-group elementor-column elementor-field-group-message elementor-col-100 elementor-field-required elementor-mark-required\">\n\t\t\t\t\t\t\t\t\t\t\t\t<label for=\"form-field-message\" class=\"elementor-field-label\">\n\t\t\t\t\t\t\t\tMessage\t\t\t\t\t\t\t<\/label>\n\t\t\t\t\t\t<textarea class=\"elementor-field-textual elementor-field  elementor-size-sm\" name=\"form_fields[message]\" id=\"form-field-message\" rows=\"4\" placeholder=\"Message\" required=\"required\"><\/textarea>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-user_info elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[user_info]\" id=\"form-field-user_info\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-utm_source elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[utm_source]\" id=\"form-field-utm_source\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-utm_medium elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[utm_medium]\" id=\"form-field-utm_medium\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-utm_campaign elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[utm_campaign]\" id=\"form-field-utm_campaign\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-utm_term elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[utm_term]\" id=\"form-field-utm_term\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-utm_content elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[utm_content]\" id=\"form-field-utm_content\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-type-hidden elementor-field-group elementor-column elementor-field-group-utm_id elementor-col-100\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t<input size=\"1\" type=\"hidden\" name=\"form_fields[utm_id]\" id=\"form-field-utm_id\" class=\"elementor-field elementor-size-sm  elementor-field-textual\">\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"elementor-field-group elementor-column elementor-field-type-submit elementor-col-100 e-form__buttons\">\n\t\t\t\t\t<button class=\"elementor-button elementor-size-sm\" type=\"submit\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Send<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/button>\n\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t<\/form>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5b7b6ea6 elementor-widget elementor-widget-text-editor\" data-id=\"5b7b6ea6\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"m-b-3 kc-company w-75 mx-auto\"><h4 class=\"font-lg font-body font-bold m-b-05\">Novatec, Inc.<\/h4><address class=\"leading-normal m-b-05\"><div class=\"hide-empty\">410-789-4811 | 800-237-8379<\/div><\/address><p><a class=\"font-semibold kc-weblink\" href=\"http:\/\/www.novatec.com\/\" target=\"_blank\" rel=\"noopener sponsored\">http:\/\/www.novatec.com<\/a><\/p><\/div><div id=\"kcExpert\" class=\"m-b-3\">\u00a0<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-704001c elementor-button-info elementor-align-center elementor-widget elementor-widget-button\" data-id=\"704001c\" data-element_type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"elementor-button-wrapper\">\n\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"https:\/\/www.novatec.com\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-home\" viewBox=\"0 0 576 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M280.37 148.26L96 300.11V464a16 16 0 0 0 16 16l112.06-.29a16 16 0 0 0 15.92-16V368a16 16 0 0 1 16-16h64a16 16 0 0 1 16 16v95.64a16 16 0 0 0 16 16.05L464 480a16 16 0 0 0 16-16V300L295.67 148.26a12.19 12.19 0 0 0-15.3 0zM571.6 251.47L488 182.56V44.05a12 12 0 0 0-12-12h-56a12 12 0 0 0-12 12v72.61L318.47 43a48 48 0 0 0-61 0L4.34 251.47a12 12 0 0 0-1.6 16.9l25.5 31A12 12 0 0 0 45.15 301l235.22-193.74a12.19 12.19 0 0 1 15.3 0L530.9 301a12 12 0 0 0 16.9-1.6l25.5-31a12 12 0 0 0-1.7-16.93z\"><\/path><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Visit Main Website<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d69999b e-flex e-con-boxed e-con e-parent\" data-id=\"d69999b\" data-element_type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-0b2ae15 e-con-full e-flex e-con e-child\" data-id=\"0b2ae15\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-3176eab elementor-position-top elementor-widget elementor-widget-image-box\" data-id=\"3176eab\" data-element_type=\"widget\" data-widget_type=\"image-box.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"elementor-image-box-wrapper\"><figure class=\"elementor-image-box-img\"><img loading=\"lazy\" decoding=\"async\" width=\"300\" height=\"200\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/gettyimages-1203752624-4.1677875326501.1677875341126.jpg\" class=\"attachment-full size-full wp-image-2480\" alt=\"\" \/><\/figure><div class=\"elementor-image-box-content\"><h3 class=\"elementor-image-box-title\">Glossary: Plastics Performance Issues<\/h3><p class=\"elementor-image-box-description\">A glossary of descriptive terms to help identify the multitude of issues that may affect performance of plastics parts<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-4afe97b elementor-align-center elementor-widget elementor-widget-button\" data-id=\"4afe97b\" data-element_type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"elementor-button-wrapper\">\n\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/glossary-plastics-performance-issues\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Read More<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-aea153b e-con-full e-flex e-con e-child\" data-id=\"aea153b\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-907b958 elementor-position-top elementor-widget elementor-widget-image-box\" data-id=\"907b958\" data-element_type=\"widget\" data-widget_type=\"image-box.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"elementor-image-box-wrapper\"><figure class=\"elementor-image-box-img\"><img loading=\"lazy\" decoding=\"async\" width=\"300\" height=\"200\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/1623959706826_kc-pt-drying-0621-new-vs-old-1.webp\" class=\"attachment-full size-full wp-image-2503\" alt=\"\" \/><\/figure><div class=\"elementor-image-box-content\"><h3 class=\"elementor-image-box-title\">Cost of Modern Dryers vs. Old Drying<\/h3><p class=\"elementor-image-box-description\">In most cases, older dryers are energy hogs compared to dryers utilizing newer and more modern technology. How much is your dryer costing you.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-260f29b elementor-align-center elementor-widget elementor-widget-button\" data-id=\"260f29b\" data-element_type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"elementor-button-wrapper\">\n\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-drying-basics\/modern-vs-old\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Read More<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-30aefec e-con-full e-flex e-con e-child\" data-id=\"30aefec\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-cb1ed73 elementor-position-top elementor-widget elementor-widget-image-box\" data-id=\"cb1ed73\" data-element_type=\"widget\" data-widget_type=\"image-box.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"elementor-image-box-wrapper\"><figure class=\"elementor-image-box-img\"><img loading=\"lazy\" decoding=\"async\" width=\"300\" height=\"200\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/1623438183550_kc-pt-drying-0621-thumb2.1678222373952-1.webp\" class=\"attachment-full size-full wp-image-2488\" alt=\"\" \/><\/figure><div class=\"elementor-image-box-content\"><h3 class=\"elementor-image-box-title\">Resin Types<\/h3><p class=\"elementor-image-box-description\">A guide to the processing characteristics of popular resin types and the method and time required for drying of each.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2f7a925 elementor-align-center elementor-widget elementor-widget-button\" data-id=\"2f7a925\" data-element_type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"elementor-button-wrapper\">\n\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-types\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Read More<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-4d2f0b3 e-con-full e-flex e-con e-child\" data-id=\"4d2f0b3\" data-element_type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b908d11 elementor-position-top elementor-widget elementor-widget-image-box\" data-id=\"b908d11\" data-element_type=\"widget\" data-widget_type=\"image-box.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"elementor-image-box-wrapper\"><figure class=\"elementor-image-box-img\"><img loading=\"lazy\" decoding=\"async\" width=\"300\" height=\"200\" src=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/Novatec-Dryer-Types-Thumbnail.1678284904281-1.webp\" class=\"attachment-full size-full wp-image-2489\" alt=\"\" \/><\/figure><div class=\"elementor-image-box-content\"><h3 class=\"elementor-image-box-title\">Resin Dryer Technologies<\/h3><p class=\"elementor-image-box-description\">There are at least a dozen types of drying technologies available to plastics processors. See which one is right for you.<\/p><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-ef03c84 elementor-align-center elementor-widget elementor-widget-button\" data-id=\"ef03c84\" data-element_type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"elementor-button-wrapper\">\n\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"https:\/\/www.novatec.com\/knowledge-center\/resin-moisture-drying\/resin-dryer-technologies\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Read More<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>Drying Parameters Energy Efficiency Reducing Heat Loss in Desiccant Regeneration Consistency of Dried Materials Resin Drying Basics Proper drying of [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":13,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-1029","page","type-page","status-publish","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v23.3 (Yoast SEO v27.1.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Drying Basics - Plastic Knowledge Center<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Drying Basics\" \/>\n<meta property=\"og:description\" content=\"Drying Parameters Energy Efficiency Reducing Heat Loss in Desiccant Regeneration Consistency of Dried Materials Resin Drying Basics Proper drying of [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/\" \/>\n<meta property=\"og:site_name\" content=\"Plastic Knowledge Center\" \/>\n<meta property=\"article:modified_time\" content=\"2026-03-18T13:50:39+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"300\" \/>\n\t<meta property=\"og:image:height\" content=\"169\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/\",\"url\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/\",\"name\":\"Drying Basics - Plastic Knowledge Center\",\"isPartOf\":{\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp\",\"datePublished\":\"2024-08-07T13:50:01+00:00\",\"dateModified\":\"2026-03-18T13:50:39+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#primaryimage\",\"url\":\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp\",\"contentUrl\":\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp\",\"width\":300,\"height\":169},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.novatec.com\/knowledge-center\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Plastic Drying Knowledge Center\",\"item\":\"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Drying Basics\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/#website\",\"url\":\"https:\/\/www.novatec.com\/knowledge-center\/\",\"name\":\"Plastic Knowledge Center\",\"description\":\"Best  Knowledge Center &amp; Practices for Plastic Processors\",\"publisher\":{\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.novatec.com\/knowledge-center\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/#organization\",\"name\":\"Novatec, Inc.\",\"url\":\"https:\/\/www.novatec.com\/knowledge-center\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/novatec_400x266.Logio_.jpg\",\"contentUrl\":\"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/novatec_400x266.Logio_.jpg\",\"width\":400,\"height\":266,\"caption\":\"Novatec, Inc.\"},\"image\":{\"@id\":\"https:\/\/www.novatec.com\/knowledge-center\/#\/schema\/logo\/image\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Drying Basics - Plastic Knowledge Center","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/","og_locale":"en_US","og_type":"article","og_title":"Drying Basics","og_description":"Drying Parameters Energy Efficiency Reducing Heat Loss in Desiccant Regeneration Consistency of Dried Materials Resin Drying Basics Proper drying of [&hellip;]","og_url":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/","og_site_name":"Plastic Knowledge Center","article_modified_time":"2026-03-18T13:50:39+00:00","og_image":[{"width":300,"height":169,"url":"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/","url":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/","name":"Drying Basics - Plastic Knowledge Center","isPartOf":{"@id":"https:\/\/www.novatec.com\/knowledge-center\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#primaryimage"},"image":{"@id":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#primaryimage"},"thumbnailUrl":"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp","datePublished":"2024-08-07T13:50:01+00:00","dateModified":"2026-03-18T13:50:39+00:00","breadcrumb":{"@id":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#primaryimage","url":"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp","contentUrl":"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/drying-parameters-heat.webp","width":300,"height":169},{"@type":"BreadcrumbList","@id":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/resin-drying-basics\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.novatec.com\/knowledge-center\/"},{"@type":"ListItem","position":2,"name":"Plastic Drying Knowledge Center","item":"https:\/\/www.novatec.com\/knowledge-center\/plastic-drying-knowledge-center\/"},{"@type":"ListItem","position":3,"name":"Drying Basics"}]},{"@type":"WebSite","@id":"https:\/\/www.novatec.com\/knowledge-center\/#website","url":"https:\/\/www.novatec.com\/knowledge-center\/","name":"Plastic Knowledge Center","description":"Best  Knowledge Center &amp; Practices for Plastic Processors","publisher":{"@id":"https:\/\/www.novatec.com\/knowledge-center\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.novatec.com\/knowledge-center\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.novatec.com\/knowledge-center\/#organization","name":"Novatec, Inc.","url":"https:\/\/www.novatec.com\/knowledge-center\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.novatec.com\/knowledge-center\/#\/schema\/logo\/image\/","url":"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/novatec_400x266.Logio_.jpg","contentUrl":"https:\/\/www.novatec.com\/knowledge-center\/wp-content\/uploads\/2024\/08\/novatec_400x266.Logio_.jpg","width":400,"height":266,"caption":"Novatec, Inc."},"image":{"@id":"https:\/\/www.novatec.com\/knowledge-center\/#\/schema\/logo\/image\/"}}]}},"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"gform-image-choice-sm":false,"gform-image-choice-md":false,"gform-image-choice-lg":false},"uagb_author_info":{"display_name":"novateckc","author_link":"https:\/\/www.novatec.com\/knowledge-center\/author\/novateckc\/"},"uagb_comment_info":0,"uagb_excerpt":"Drying Parameters Energy Efficiency Reducing Heat Loss in Desiccant Regeneration Consistency of Dried Materials Resin Drying Basics Proper drying of [&hellip;]","_links":{"self":[{"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/pages\/1029","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/comments?post=1029"}],"version-history":[{"count":62,"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/pages\/1029\/revisions"}],"predecessor-version":[{"id":5058,"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/pages\/1029\/revisions\/5058"}],"up":[{"embeddable":true,"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/pages\/13"}],"wp:attachment":[{"href":"https:\/\/www.novatec.com\/knowledge-center\/wp-json\/wp\/v2\/media?parent=1029"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}