By Greg Washburn and Joshua Belisle · Edited by Dana Gardner
Published August 7, 2024 · Reviewed by Greg Washburn · August 21, 2026
Summary
What are ultra high efficiency vacuum pumps used for in conveying?
Ultra high efficiency vacuum pumps are used for large resin throughputs over long conveying distances. They provide very high vacuum capacity with a steady performance curve across the operating range, reduce energy costs, and can lower installation costs by moving more material through smaller lines. They come in sizes up to 15 Hp, work with 1.5 to 3 inch lines, and provide 16 in. Hg operating vacuum.
These ultra high efficiency vacuum pumps reduce energy costs while providing very high vacuum capacities for large throughputs of resin over long conveying distances. They have a steady performance curve over the entire operating range. These are superior pumps that not only save in energy costs but also can reduce system installation costs by moving more material through smaller line sizes. Sizes range up to 15 Hp but with much higher performance ratings than pumps of comparable sizes.
Ultra High Efficiency Pumps can be used with 1.5 – 3” diameter lines and provide 16” Hg of operating vacuum.
Compare Details of the UltraVac to Other Types of Pumps for Plastic Resin Conveying Systems
Frequently Asked Questions
What line sizes work with ultra high efficiency vacuum pumps?
Ultra high efficiency pumps can be used with conveying lines from 1.5 to 3 inches in diameter and provide 16 in. Hg of operating vacuum. Because they move more material through smaller line sizes, they can reduce system installation costs.
How do ultra high efficiency pumps compare to other pumps of the same size?
Ultra high efficiency pumps are offered in sizes up to 15 Hp, but they carry much higher performance ratings than pumps of comparable size. They hold a steady performance curve over the entire operating range and reduce energy costs while delivering very high vacuum capacity.
About the Authors
Vice President of Operations, Novatec
Greg Washburn is Vice President of Operations at Novatec and has been with the company for more than three decades. He is involved in all phases of engineering design and product manufacturing, giving him a broad perspective on how resin drying and conveying equipment moves from engineering concept through production and into real-world processing environments. Greg holds a B.S. in Mechanical Engineering from the University of Maryland, Baltimore County (UMBC) and an MBA from Loyola University Maryland. His experience spans engineering, manufacturing and operations across Novatec’s material-handling technologies.
Technology Manager, Novatec
Joshua Belisle is Technology Manager at Novatec, where his work focuses on simulation and technology development for resin drying. He earned a B.S. in Mechanical Engineering with a minor in Engineering Business from the University of Virginia in 2023 and joined Novatec that same year. Joshua uses simulation tools to investigate previously difficult-to-measure aspects of the drying process, helping Novatec better understand airflow, heat transfer and other variables that influence resin-drying performance.
Related Articles
Compare vacuum pump types, operating ranges and energy use when choosing a resin conveying pump.
Review positive displacement pump vacuum levels, line sizes and features for high throughput or long distance conveying.
Compare single-stage and dual-stage regenerative blower pumps, their line sizes and operating vacuum levels.
Ask the Expert
